Update Payakumbuh

Update CBTRN Payakumbuh

update cbtrn
set ct_cash_code='8.01.10'
where ct_cash_code='8.01.11' /

/var/spool/cron/crontabs

0,15,30,45 8-18 * * * * /usr/bin/liaplactest  2> /dev/null

0 6 * * * /u/user/profile/indra/tmp/ilang2  2> /dev/null

0 17 * * * /u/data/sms_gateway/bday  2> /dev/null

0 7 * * * /u/data/sms_gateway/bdaysend  2> /dev/null

0 0 * * * /usr/bin/cleantmp  2> /dev/null

5 0 * * * /usr/bin/hapustmp  2> /dev/null

0,10,20,30,40,50,59 7-21 * * * /u/data/sms_gateway/iplace 2>/dev/null

0 6 * * * /u/user/profile/indra/tmp/quote0 2> /dev/null

0 0 1 1 * /u/user/profile/indra/tmp/nice 2> /dev/null

45 8-18 * * * /u/user/profile/indra/pinging 2>/dev/null

30 10,16 10-31 3,6,9,12 1-6 /u2/webroot/siswa/promotion 2>/dev/null

5 17 * * *  /u2/webroot/siswa/placement 2>/dev/null

10 8-21 * * * /u2/webroot/finance/rutin 2>/dev/null

15 8-18 * * * /u2/webroot/finance/rutin1 2>/dev/null

20 12 * * * /u2/webroot/finance/rutinklas 2>/dev/null

#30 18 * * * /u2/webroot/finance/rutin1 2>/dev/null

run iplace 

/u/data/placement -- > data Placement 

/u/data/placement_ --> 

link SCO Open Server

ftp://ftp.sco.com/pub/openserver5/drivers/OSR506/btld/

Server Malang Super Micro P4SC8

Install Server LIA Malang

defbootstr link=ad320

Controller=0
Bus=0
Disk ID=0
Lun=0

Adaptec AIC-7902 Dual-Channel
    Ultra320 SCSI

when sco issue this warning it is because the disk controler is different from the original machine.

to correct this issue you need the boot and root diskettes created from the OLD computer and the "BTLD" driver for the new disk controler.

on the new computer, boot with the diskette using the following command:
defbootstr link=ad320 root=ad320(0,0,0)

where "link=ad320" stands for the driver name
and "root=ad320(0,0,0,0)" tell sco what the hard drive address is. (controler #,bus #, disk id#, lun always 0)

This example is for an adaptec SCSI 320 controler, you need to adapt the command according to the controler installed.

Bon Jovi - Thank You For Loving Me (Official Uncut Music Video)

Make BTLD lsil

What LSI Logic Host Adapters are supported by the lsil Host Bus Adapter driver?

KEYWORDS: openserver v5 osr5 lsi adapter drivers bus pci advanced hardware supplement ftp downloadable lsil scsi fibre mpt VERSION 1.03.28

RELEASE:  SCO OpenServer Enterprise System Release 5.0.6a, 5.0.7
          SCO OpenServer Desktop System Release 5.0.6a, 5.0.7
          SCO OpenServer Host System Release 5.0.6a, 5.0.7

HARDWARE: LSI Logic 53C1020   Ultra 320 SCSI
          LSI Logic 53C1030   Ultra 320 SCSI
          LSI Logic 53C1035   Ultra 320 in SCSI Mode
          LSI Logic 53C919    Fibre Channel
          LSI Logic 53C929    Fibre Channel
          LSI Logic 53C919X   Fibre Channel
          LSI Logic 53C929X   Fibre Channel

PROBLEM:  What LSI Logic Host Adapters are supported by the lsil Host Bus
          Adapter driver?

NOTE:     This driver package is to be installed on:

                  SCO OpenServer 5.0.6a, 5.0.7

SOLUTION: These drivers are available at the following URL:

          ftp://ftp.sco.com/pub/openserver5/507/drivers/lsil_1.03.28/


          Modification History
          ********************
          5.0.6, 5.0.7 - Updated driver version from 1.03.27 to
                         1.03.28, 9/14/04 
          Changes from 1.03.27: 
                 o Check Nvram data and limit Domain Validation activities 
                   if requested.  
          Defect fixes:
                 o Accommodate disk drives with capacity greater than 64 GB 
          ********************
          
        
          To install these drivers, follow these instructions:

          1. Aquire the driver from the ftp address listed above.

            - Download the btld image to a directory/file on your
              machine. For example, /tmp/lsil.btld.img

            - Verify the downloaded image using sum.

                 sum -r /tmp/lsil.btld.img

              This should return:

                     50483 2880 /tmp/lsil.btld.img

            - Format a floppy disk using the format command. 

              # format -v /dev/rfd0135ds18

            - Copy the downloaded image to the floppy:

                 dd if=/tmp/lsil.btld.img of=/dev/fd0 bs=18k

            - Verify the copied floppy image using sum:

                     sum -r /dev/fd0

              This should return:

                 50483 2880 /dev/fd0

           2a. Fresh Installation on Primary Drive

             - Insert a boot disk or Installation CD and boot the
               system.

             - At the boot prompt, type:

                     defbootstr link=lsil

             - Press  and continue with normal installation.

           2b. Installation on a Secondary Drive

             - Boot and Login normally.

             - Mount the floppy image:

                     mount -r /dev/fd0 /mnt

             - Use the BTLD Install script to install the driver:

                     /etc/btldinstall /mnt

        Once the kernel has been relinked, reboot the host and
        verify that is initializing the card. The boot time 
        banner should look something like:

%adapter 0xec00-0xecff 11 - type=lsil ha=0 slot=0 bus=0 id=7 fts=sto

        When the adapter is installed and the boot-time banner is
        properly displayed, you may use the appropriate mkdev
        script to add a disk, tape, or cdrom to the SCSI and/or
        Fibre Channel Bus.

License sco unix

License 100-User License 
License Number: 5HA020641 
License Code: mzijppob 
License Data: g;k;u100;mbeyjyf 
------------------------------------------- 
Caldera UnixWare 7 
License Number: 
2GL073082 
License Code: 
hwmtuhca 
License Data: 
k0;m7tkt7c 


sco merge====================================== 
License Number: EVLMERGE4 
License Code: nnhdzhcf 
License Data: b0008;d60;k0;q0;m5ydkk7 

License Number: EVLMERGE5 
License Code: tdrthlid 
License Data: d60;k0;q0;mmbr90w